Western Timber Frame™ designs, engineers, and builds custom timber frame pergolas, pavilions, and outdoor living structures across Draper, Utah. Every structure is engineered to the specific lot: its soil, its grade, its snow and wind load, and the way you use the space.
18+
Years
7000+
Projects
50
States
28
Awards
Designed and Built in Utah — About 45 Minutes Away
Our structures are made in Utah — designed, engineered, and CNC-cut at our facility in Payson, about 45 minutes away. Every one of the 7,000+ structures we’ve delivered nationwide since 2008 started as raw timber on that shop floor.
For a Draper buyer, that means an in-person consultation, timber cut in-state, and real joinery you can drive to before you commit. We’ve built here, too, including the fireplace pavilion, the hip-roof pavilion, the lattice pergola, the raised gazebo, and the bleach-stained pavilion and pergola with TimberVolt® power pictured on this page.
It’s also why the U.S. Small Business Administration named us the 2026 SBA Utah District Manufacturing Small Business of the Year.
Designing Timber Structures for Draper’s Climate & Lifestyle
Draper sits at about 4,750 feet at the south end of the Salt Lake Valley, where the Point of the Mountain meets the Wasatch foothills; the Salt Lake County Flight Park there is known as one of the best places to hang glide in the world. Draper adopts the state’s building codes and doesn’t publish its own wind, frost, or snow figures, so we engineer each structure to the loads for your address, using the Utah Ground Snow Load Map for snow. Summers run hot, too: the Western Regional Climate Center’s record for the Draper Point of the Mountain station (1985–2008) shows an average July high of about 94°F, which is why real shade matters here.
Draper’s code limits all detached accessory buildings to 8% of the lot and keeps them at least 6 feet from the home. Structures of 200 square feet or less must sit behind the front of the house and stay under 12 feet to the peak, while larger ones need 10 feet from property lines. Steeper foothill lots may also fall under the city’s Hillside Sensitive Lands Overlay Zone. We work through those requirements with you during design, before a single beam is cut.
Our standard engineering starts at 115 mph. Where the project requires a higher design wind speed, the structure is engineered for that requirement. We also engineer to your lot’s real snow load, soil, and exposure.
Neighborhoods we design for:
Foothill lots on SunCrest and South Mountain
Higher lots on Traverse Ridge and the South Mountain area, where grade, views, and the city’s hillside rules shape the footing and roof design.
Agricultural and equestrian lots
Lots in Draper’s agricultural zones, where estate lots, stables, and animals share space with the home and a structure is placed around the way the property works.
Older homes near the Historic Town Center
Established yards near Draper’s Historic Town Center, where a structure has to fit a mature lot and an older home.
Draper began in 1849 as South Willow Creek and was later named Draperville in honor of William Draper Jr., according to the city’s history. Draper has fourteen properties on the National Register of Historic Places, the early-1920s Day Dairy Barn now stands in Draper City Park, and every July Draper Days brings a rodeo, parade, and fireworks. With more than 150 miles of trails, including Corner Canyon, Draper is a city built around time outdoors. A timber structure earns its place here by fitting that history and standing up to real snow, wind, and summer sun. For statewide engineering and climate detail, see our Utah timber structures page.
Structures We Build in Draper
Every structure is a Custom-Engineered Kit — purpose-built for your space, architecture, and lot.
Custom Pergolas: Best Fit For Draper
With July highs in the mid-90s, a Draper patio needs shade that actually works. A pergola has to deliver real shade and read as a permanent part of the home, not a mail-order add-on, whether it sits on a foothill lot with valley views or beside an established home near the town center. That’s where custom engineering separates from a catalog cover.
Many aluminum and light-frame pergola kits provide significantly less coverage, while our ShadePrint™ approach measures actual coverage and can reach 80–85%, varying by orientation and time of day. Unlike metal, timber has low thermal conductivity, so it doesn’t heat the skin as quickly in the sun and surfaces stay more comfortable to the touch. Engineered for Draper’s foothill lots and summer sun, the Dovetail Difference® interlocks the timbers without metal brackets or exposed fasteners, with no visible hardware to loosen. Add lighting and power through TimberVolt® — engineered in, not bolted on.
The same craftsmanship scales up: Draper’s businesses, parks, and event venues use commercial timber pavilions to turn a patio into a year-round, instantly recognizable space.
Our Timber Frame Design & Build Process in Draper
Design Consultation
In person or remote, designed around your lot, home, and views.
Engineering for Draper Conditions
Engineered to your lot’s soil, grade, snow load, and wind, based on the specific conditions of your property. We provide engineering documentation to support permitting and stamped drawings prepared by a licensed engineer where the project and jurisdiction require them.
Fabrication & Quality Control
Every timber is cut in-house at our own Payson shop, on CNC machinery we own and run ourselves — not sent out to a third-party fabricator. That means the same team that engineers your Draper structure also cuts it, with one line of control and accountability from design to delivery.
Warranty Coverage
Every Western Timber Frame structure carries a limited structural warranty. Length runs from 3 years on Deck Structures to 25 years on the 12K Series, based on the series you purchase.
Delivery & Installation Support
Ships as a Custom-Engineered Kit with complete instructions; DIY-friendly, or we can coordinate installation support.
We build around local permitting, including Draper’s requirements for accessory-building setbacks, lot coverage, hillside rules, and site-specific loads.
FAQs About Timber Structures in Draper, Utah
What Our Clients Say About Us
2026 SBA Utah District Manufacturing Small Business of the Year
National recognition for excellence in craftsmanship, client service, and small business leadership.
National Timber Frame Expertise, Built in Utah
With 28 Best of State Awards, multiple Inc. 5000 honors, an HGTV Design Excellence Award, the 2026 SBA Utah District Manufacturing Small Business of the Year, and 7,000+ structures built nationwide since 2008, Western Timber Frame designs and builds custom, structural, real-wood timber structures for homeowners and commercial clients who want true craftsmanship, not off-the-shelf catalog designs.
Send us your project details, and we’ll design a structure purpose-built for your Draper property.